Packaging terms-Metal containers(7)
5.31 Tank can without lid
Three-piece jar without lid.
5.32 ring
It is fixed on the top of the can body by double crimping, and there is an opening in the center to install the component of the can lid.
5.33 expansion circle expansion ring
The concave-convex pressure ring formed by stamping the lid or the bottom of the can to meet the needs of the expansion of the contents when the can is sterilized.
5.34 ring tab
An annular attachment that is pre-riveted to the lid for easy opening.
5.35 notch score
A tear line pre-pressed or scored on the easy-open lid or on the can body for ease of opening.
5.36 Rivet
Pre-punched blisters for riveting the pull tab to the easy-open lid.
5.37 can opening key
The can unroll attachment for rolling the can through the tongue tab.
5.38 side seam
Welded seams at both ends of the can body plate after the can body is formed. The body seams of tin-welded cans are seam seams; the seams of resistance-welded cans are lap joints; the body seams of laser-welded cans are butt joints.
5.39 basic end
Semi-finished covers without other accessories.
5.40 cups
In the production of two-piece cans, the metal material is drawn into a shallower cup blank while punching for further deep drawing.
