News

The Advantages And Production Process Of Tin Cans

The advantages and production process of Tin Cans

The main raw material of Tin Cans is steel plate, which is generally required to have a flat surface, low stiffness, low carbon content, and uniform thickness. The auxiliary materials required for the manufacture of Tin Cans include sealants, gaskets, closures and coatings. Crimping sealants require good elasticity, high adhesion, many curing components, good chemical resistance and process performance.

The manufacturing process of Tin Cans involves a wide range of technical fields. The following processes are usually required: sheet material uncoiling and leveling → cutting and blanking → barrel body welding → barrel body flanging → barrel body expansion → coil packaging and assembly → barrel bottom cover forming and pre-rolling → surface treatment → inner surface spraying and External surface painting → printing.

Tin Cans have been the main paint packaging container for over 100 years. In use over the years, Tin Cans have formed a complete series and product standards and specifications. Although the drums have evolved over time, the basic design has remained largely the same. Mature production and complete production lines are a huge obstacle to the development of any later packaging form.

However, Tin Cans also have some shortcomings. For example, Tin Cans are mainly round drums, and some smaller-capacity drums have lifting rings. However, the shape of the steel drum is relatively simple, and it is difficult to make more patterns, and it is not easy to form differentiated packaging on the packaging of different brands of paint. Although the development of printing technology has made it possible to print exquisite patterns on the surface of Tin Cans, most of the Tin Cans have roller ribs on the barrels, which affects the exquisiteness and display effect of the patterns. In addition, in the process of use, it is difficult to use up each barrel of paint at one time, so the paint packaging requires better sealing. The sealing performance of the lid of the open steel drum is average, which is also one of the unsatisfactory dead spots of the steel drum.


You Might Also Like

Send Inquiry