Knowledge

Packaging terms-Metal containers(17)

9.11 Seam length


The largest dimension of the stack parallel to the seam measured from the outside of the seam.


9.12 seam thickness


The largest dimension of the stack perpendicular to the seam measured from the outside of the seam.


9.13 Countersink depth


The distance from the top of the double bead to the flat surface near the shoulder of the inner wall of the bead. See Figure 38.


9.14 interior seam measurements


Refers to the structural dimensions of the internal parts after the double hemming is dissected, including body hooks, cover hooks, gaps, overlapping lengths, etc. See Figure 38.


9.15 body hook


When the double hem is formed, bend the flanged portion of the barrel or can to a hooked length.


9.16 cover hook


When the double bead is formed, bend the cap hook to the length of the inside of the bead.


9.17 Overlap length


After the double hemming is formed, the length of the overlapping part of the body hook and the cover hook is measured by dissection.


9.18 overlap percent


Indicates the length of the overlapping part of the inner body hook and the cover hook of the double hemming, that is, the ratio of the overlapping length to the overlapping length plus the length of the gap between the two ends.


9.19 tightness rating


After the double curling was dissected, the uneven wrinkling phenomenon on the periphery of the cover hook was observed with the naked eye, indicating the compression degree of the double curling.


9.20 wrinkle rating


The ratio of the maximum length of the wrinkle on the lid hook to the entire lid length after the dissection of the double crimp. The wrinkle degree has a corresponding relationship with the compactness, that is, the smaller the wrinkle degree, the greater the compactness.


You Might Also Like

Send Inquiry