Knowledge

Packaging terms-Metal containers(13)

8.2 Closures for barrels


8.2.1 bung


Plugs with external threads for use with threaded necks.


8.2.2 Countersunk plug


A plug with a grooved countersunk that engages a wrench or other tool.


8.2.3 Press cap, snap-on cap


A snap-on, snap-on lid with a serrated edge and a gasket for use with a special snap-on neck. See Figure 26.


8.2.4 crimp cover, lug cover


A lid with surrounding extensions or ears that are bent so that the lid fits securely over the body of a metal barrel. See Figure 6.


8.2.5 bolted cover


A lid that bolts to the top of a metal bucket. See Figure 3.


8.2.6 Snap lid lid with lug


A metal cover with lugs, the lugs on the cover are engaged with the concave parts of the matching accessories, and the cover can be snapped tightly by turning the cover a little. See Figure 27.


8.2.7 neck


A protruding part that is molded or fitted to a container. Containers can be filled or emptied from here.


8.2.8 Screw neck


A neck with an external thread that engages and seals with a threaded cap. See Figure 28.


8.2.9 Bung flange


A closure part with an internal thread that can be engaged with a cock.


8.2.10 Clip clip


A component that secures the lid to the barrel. See Figure 29.


8.2.11 closing ring


A formed ring belt for clamping the movable end cap on the barrel and the two ends of the belt are connected by iron rings, tightening ears, bolts, or other mechanical devices. see picture 1.


8.2.12 lever-lock ring


Closure hoop with levers at both ends. See Figure 5.


8.2.13 bolted-lock ring


You Might Also Like

Send Inquiry